Laser cutting is a technique that uses a high-power density laser beam to irradiate the workpiece, causing the irradiated material to quickly melt, vaporize, extinguish, or reach the ignition point. The molten substance is then expelled by the high-speed airflow coaxial with the beam, thus achieving cutting. Compared to traditional cutting methods, laser cutting has multiple advantages.
Firstly, laser cutting is highly efficient. As a non-contact processing method, it avoids the impact forces associated with mechanical shear, thus eliminating tool wear. Cutting is done in a single pass, eliminating the need for further processing. Secondly, laser cutting provides high-quality cutting results. The precision of laser cut materials is high, and high accuracy and precision are achieved through the transmission of a focused beam. The narrow cutting width, minimal heat-affected zone and smooth edges of laser cutting provide a distinct advantage in detailed design and creating complex shapes.
Furthermore, laser cutting has a wide range of material adaptability. It can be used in the processing of metallic and non-metallic materials, including but not limited to metal sheets and tubes. This wide adaptability of materials makes laser cutting technology widely applicable across multiple industries.
Lastly, laser cutting also brings economic benefits. Although the initial investment is relatively high, in the long run, due to its high efficiency, low maintenance requirements and ability to reduce material waste, usage and maintenance costs are low. Additionally, laser cutting has short setup times, involving more machine programming than material loading, which further reduces production setup time.
Types of laser cutting machines
Laser cutting machines can be mainly categorized into three types based on the different lasers used: fiber laser cutting machines, CO 2 laser cutting machines and YAG laser cutting machines. YAG laser cutting machines are widely used due to their high precision and the fact that they do not require any processing gas, allowing them to process various materials.
It is important to note that YAG laser cutting machines have been discontinued, with fiber laser cutting machines currently dominating the market.
In conclusion, the common types of laser cutting machines on the market include fiber laser cutting machines, CO 2 laser cutting machines and YAG laser cutting machines, with fiber laser cutting machines being the current leaders of Marketplace.
The following post will also provide guidance on how to select the best fiber laser cutting machine.
- How to choose fiber laser cutting machine? (Buyer's Guide)
- How much does a fiber laser cutting machine cost?
What are the top laser cutting machine manufacturers in this era of advanced technology? Let's look at the top 10 laser cutting machine brands of 2021.
Top 10 laser cutting machine manufacturers in the world
Let's evaluate the pros and cons of laser cutting machines produced by the following brands.
1. TRUMPF
Founded in 1923 and headquartered in Ditzingen, Germany, TRUMPF has more than 90 years of history in machine tool production and is a global market and technology leader in the areas of industrial machine tools and lasers.
With the evolution of the market, TRUMPF, after multiple transformations and innovations, has grown from a small mechanical factory at its beginning to a large multinational business group with approximately 13,500 employees worldwide.
In fiscal year 2021/22, TRUMPF's sales revenue reached 4.223 billion euros (equivalent to approximately 29.6 billion RMB).
Throughout its history, Trumpf has established itself as a leader in international markets and technologies in various business fields.
If you work with relatively homogeneous materials in large quantities, Trumpf is a good option. The cutting head can be easily replaced and cleaning the cutting lens is convenient.
However, the manual operation function may not be as easy to use.
2. Bystronic
Founded in Switzerland in 1964, Bystronic is a company focused on automatic control of the entire flow of materials and data in the cutting and bending process chain.
It offers solutions for sheet metal processing, including laser cutting systems, press brakes, automation and software solutions.
With more than 30 branches worldwide responsible for sales and technical support, Bystronic is a global provider of sheet metal processing solutions.
In terms of manual operation, Bystronic is known for its user-friendly processing parameter adjustments, but manual adjustment methods may not be suitable for materials with unstable quality such as hot-rolled sheets.
3 and 4. TANAKA AND KOIKE
TANAKA and Koike are specialized in producing large table, gantry type structured laser cutting machines.
An advantage of these machines is the large work surface, which can reach several meters in length and 3 to 6 meters in width, which makes them ideal for cutting medium-sized sheets.
For example, a metal plate measuring 3×9 meters or 2×6 meters can be placed directly on the bench for cutting.
However, one disadvantage is that the laser generator moves with the machine, which can make it quite heavy.
Furthermore, the cutting speed for thin sheets (3mm or less) is slower compared to desktop laser cutting machines.
TANAKA laser cutting machines, made in Japan, are known for their ability to cut thick sheets up to 30 mm.
They are mainly used in the processing of structural parts and are one of the few options available for processing large parts and thick sheets.
5. Beloved
Amada is a well-known multinational company specializing in sheet metal processing machines, such as numerical control punching machines, bending machines, sheet metal cutting machines and laser cutting machines.
In 1946, Isamu Amada founded Amada Co., Ltd., initially focusing on sheet metal machinery and cutting products business. Today, Amada has become a large multinational company specializing in the production of sheet metal processing machines, boasting a variety of these products.
In 2022, Amada Group's total revenue reached 365.687 billion yen, approximately 18.9 billion RMB.
The company focuses on direct sales and service and is a comprehensive manufacturer of metal processing equipment, contributing to the growth of the world economy in four areas of activity: sheet metal, stamping, cutting and machine tools.
6. Mazak
Mazak, founded in 1919 in Japan, specializes in offering comprehensive solutions for compound machining, five-axis machining, milling, turning, CNC systems and automation.
It is one of the few machine tool manufacturers that has established a global production system.
Mazak produces the world's smartest laser machine, capable of cutting not only 3D parts, but also providing software and special profile cutting.
Furthermore, it is equipped with devices for threading and chamfering after laser cutting.
7. Salvagnini
Salvagnini, founded in 1963, specializes in research and development, manufacturing and sales of flexible equipment and systems, such as flexible sheet metal production lines, fiber optic laser cutting machines, robots, panel benders and automated logistics warehouses. .
It has established itself as a leading example in the field of global flexible sheet metal processing technology and is dedicated to providing intelligent solutions for sheet metal factories.
8. PrimaPower
As a well-known brand in the field of sheet metal processing machines and systems, PrimaPower is recognized for its extensive line of 3D laser cutting equipment.
Its product offerings cover all aspects of laser processing, including stamping, cutting, bending and automation, covering all stages of sheet metal processing.
PrimaPower is one of the manufacturers with the widest range of products in the sector.
In addition to its extensive product line, PrimaPower is also known for its highly complete servoelectric solutions for stamping, bending and integrated processing, available globally.
9. Messer
Founded in 1898 in Germany, Messer Cutting Systems is a global provider of comprehensive solutions for the metal processing industry. They offer reliable cutting technology, flexible services and intelligent software solutions.
Its product line includes flame, plasma and laser cutting systems that suit a wide range of applications, from hand cutting to shipbuilding.
They also offer machines and equipment for welding, cutting, soldering, brazing and heating with oxygen gas.
10. Mitsubishi
Founded in 1871 in Japan, Mitsubishi is a world-renowned manufacturer of non-ferrous metals. Its CNC tools and hardware products have gained worldwide recognition.
Since entering China in the 1990s, Mitsubishi Integrated Materials Group has established manufacturing companies, sales companies and representative offices in many locations.
Currently, its business covers a wide range of areas, including automotive parts, electronic components, processing tools, environmental protection, energy, metals, ceramics, composites and more.
Top 10 Laser Cutting Machine Manufacturers in China
| Laser Sheet Metal Cutting Equipment Revenue Scale | Laser equipment integrators (cutting business division) |
| Revenue > 1.5 billion yuan | Han Laser, HSG Laser |
| Revenue between 1 billion yuan and 1.5 billion yuan | Bodor Laser, Suzhou Quick Laser and others |
| Revenue between 500 million yuan and 1 billion yuan | Bystronic DNE Laser, Shandong Leiming (Senfeng Technology), Huagong Tech, Penta Laser, Gweike Laser, Leading Laser, Cheeron Laser and others |
| Revenue between 300 million yuan and 500 million yuan | Yawei, Hymson etc. |
1. HAN LASER
Han's Laser, founded in Shenzhen, China in 1996, has established itself as one of the leading players in China's laser machine manufacturing industry.
The company prides itself on its global competitiveness and has several subsidiaries that sell laser cutting machines.
With a robust research and development team of hundreds of employees and numerous international invention patents, national patents and software copyrights,
Han's Laser offers a full range of laser processing solutions and support facilities for customers at home and abroad.
Its product portfolio includes more than 200 industrial laser equipment and intelligent equipment, including laser marking machines, welding machines, cutting machines, new energy laser welding equipment, industrial robots and automation solutions.
In 2004, Han's Laser was listed on the Shenzhen Stock Exchange and has since grown to employ more than 10,000 people worldwide, with assets valued at more than 7 billion yuan.
As of the end of June 2023, Han's Laser's total assets were valued at 3,526,392.43 million yuan, with net assets worth 1,787,450.99 million yuan. The company's operating profit for the year 2022 was 1,496,118.50 million yuan, with a net profit of 128,179.19 million yuan.
2. Hglaser
It operates under two brands, Huagong Laser and FARLEY LASERLAB.
HuaGong Technology was founded on July 28, 1999, with a primary product line that includes laser marking machines, bamboo strip laser engraving, laser welding machines, laser processing machines and laser cutting machines. laser. HuaGong Technology was publicly listed on the Shenzhen Stock Exchange on June 8, 2000. As of the end of June 2023, HuaGong Technology's total assets amounted to 1,745,842.82 million yuan, with net assets of 874,890.09 million of yuan. The company's operating profit in 2022 was 1,201,102.88 million yuan, and the net profit was 89,056.64 million yuan.
As a pioneer in the application of laser industrialization in China, Huagong Laser has five product lines.
- Laser Precision Microfabrication Equipment
- High Power CNC Laser Manufacturing Equipment
- CNC Thin Plasma Cutting Series
- Laser and main components
- Large surface treatment and remanufacturing equipment
They are widely used in a variety of industries, including iron and steel metallurgy, non-ferrous metals, automobiles and parts, aerospace, military electronics, precision instrumentation, machine manufacturing, molds, hardware tools, integrated circuits, semiconductor manufacturing , solar energy, education, communication, measurement, packaging, footwear, leather, plastics, jewelry, handmade gifts, medical equipment and more, and contribute to improving the global level of equipment manufacturing.
3. Chutian Laser
It was founded in Wuhan in 1985 and is the flagship company of Wuhan Optical Valley.
The company employs more than 1,000 people and has received attention from national and international leaders, with 22 national and 5 foreign leaders visiting the company.
Chutian Laser was designated as a laser application service provider for the Shenzhou series of spacecraft from Shenzhou-1 to Shenzhou-8, and gained recognition as a “Shenzhou Six Aerospace Engineering Meritorious Unit”.
With more than 400 national patents, the company operates in several sectors, including aerospace, aviation, electronics, health, metallurgy and culture.
Its laser products offer a wide range of applications such as welding, marking, cutting, drilling, heat treating and resisting, making it a full-spectrum laser manufacturer.
4. Lead Laser
Leading Laser specializes in the research and development, manufacturing and sales of high-power laser processing equipment, demonstrating its strength.
However, high-power lasers are expensive. The company was among the first group of high-tech companies established in high-tech development zones.
5. Bystronic DNE
Bystronic DNE was founded in Shenzhen and has gained significant market influence, unique service appeal and market share in the field of laser cutting machines in China through years of dedicated research, development, production and sales of laser cutting machines for metal.
Its main products include high-power fiber laser cutting machines (ranging from 2000W to 12000W) and medium-power fiber laser cutting machines (<2000W).
These machines are widely used in industries such as electrical power, automotive manufacturing, machinery and equipment, electrical equipment, hotel kitchen equipment, elevator equipment, advertising signs, automobile decoration, sheet metal production, precision parts, hardware products and others.
6. Laser HSG
Foshan HSG Laser is a high-tech company that provides global customers with intelligent laser equipment solutions.
It is dedicated to manufacturing intelligent laser equipment and focuses on efficiency, intelligence, environmental friendliness and compatibility in product development.
Founded in 2006, HSG Laser has experienced rapid growth and now operates four standardized intelligent equipment manufacturing facilities with a total area of 40,000 square meters or more.
It specializes in flexible manufacturing and digital hierarchical management in areas such as laser robots, multi-axis linked professional cutting tubes, and intelligent automatic precision welding production lines.
HSG Laser's intelligent equipment operates successfully in more than 100 countries and has a wide range of prestigious customers in various industries, including precision instruments, automotive parts, kitchen and bathroom hardware, electronics and electrical, and smart homes.
The company has a professional R&D team and a well-established after-sales technical support department, providing a customer-centric service experience.
7. Bodor Laser
Jinan Bodor Laser was founded in 2008 and follows a brand development strategy that emphasizes both employee development and product innovation.
8. Hymson
Hymson Laser is a nationally recognized high-technology company specializing in the field of lasers and automation.
Founded on April 3, 2008, Hymson mainly engages in the research, design, production and sales of laser and automation equipment for industries such as consumer electronics, power batteries and sheet metal manufacturing. On September 9, 2020, it was listed on the Science and Technology Innovation Board of the Shanghai Stock Exchange. As of the end of June 2023, Hymson's total assets amounted to 10,172,808.85 ten thousand yuan, with net assets of 2,130,873.9 ten thousand yuan. Its operating profit in 2022 was 4,105,415.55 ten thousand yuan, with a net profit of 375,493.2 ten thousand yuan.
The company is recognized as one of the industry's best providers of comprehensive laser and automation equipment solutions.
Its products range from lithium battery automation equipment, air-cooled UV laser equipment, large-scale automatic production lines, large-scale laser cutting equipment, sapphire cutting equipment and PCB marking equipment.
Hymson Laser is dedicated to continually improving and providing more efficient and high-quality solutions to its customers in the lithium battery, 3C and sheet metal industries.
9. Fiber LASER
Shandong Leiming Laser is dedicated to the development, production and sales of fiber laser cutting machines.
The company provides a complete line of fiber laser cutting machines, laser welding and processing equipment, and cleaning equipment.
These machines are widely used in industries such as steel metallurgy, non-ferrous metals, automotive, aerospace, military electronics, precision instrumentation, machine manufacturing, hardware tools, integrated circuits and solar energy.
10. Fast laser
Headquartered in Jiangsu Free Zone, China, Quick Laser is dedicated to the development, production and sales of laser equipment.
The company provides a comprehensive range of laser application solutions and equipment customization services for global manufacturers, including laser cutting machines, laser welding machines, laser tube cutting machines, laser micromachining and workstations automotive welding.
With more than 100 invention patents, Quick Laser has independently developed innovative laser production lines, such as a cup and pot welding and cutting line, a five-axis linkage instrument welding machine, a cutting machine automatic wafer and fan and a zero tail material cutting machine with three parallel mandrels.
How to choose the right brand of laser cutting machine
Choosing the right brand of laser cutting machine requires comprehensive consideration of various factors such as product quality, performance, after-sales service, price and market demand.
First of all, pay attention to the basic settings of the laser cutting machine, such as cutting head, laser, motor, machine tool, CNC system and lens. These components directly impact the quality and performance of the equipment.
Secondly, familiarize yourself with the main laser brands on the market, such as IPG, Trumpf, nLight, SPI and Raycus. Brands with a larger market share generally have more mature technology and better after-sales service.
During the selection process, consider your company's production scope, materials to be processed and required cutting thickness to determine the suitable model, size and quantity. Furthermore, the choice of motor is crucial as it affects the movement performance and accuracy of the laser cutting machine. It is recommended to choose a servo motor due to its superior accuracy and stability. At the same time, the quality of key components, including coolers, cutting heads and lasers, is critical to laser quality.
Lastly, conduct a field inspection of the equipment manufacturer's capabilities. Understanding your product certifications, performance, production and component quality can help you make a wiser choice. In summary, when choosing a laser cutting machine brand, carefully consider all of the above factors. Choose the right brand and model to ensure you maximize the return on your investment.
What are the specific impacts of a laser cutting machine's core configuration on its performance?
The specific impacts of a laser cutting machine's core configuration on its performance are mainly reflected in the following aspects:
- Servo Motor: The servo motor is one of the main factors that affect the cutting speed. Different servo motors vary in price and performance, so special attention should be paid to their performance when choosing, to ensure that the cutting speed meets production requirements.
- Fiber laser: As a photoelectric conversion device, fiber laser is a critical core component in laser cutting machine. Its power directly affects cutting capacity. Generally, the power of fiber laser used to cut metal materials should be at least 300W. For situations that require cutting thicker metal materials, the laser energy demand will be greater.
- General configuration and performance: In addition to the main components, the overall configuration and performance of the equipment are also important factors that affect cutting accuracy and efficiency.
- Focal position, auxiliary gas, laser output power: These three factors are also key points that affect the quality of laser cutting. Adjusting the focal position can optimize the cutting process, using auxiliary gas can improve the cutting effect, and the size of the laser output power is directly related to the cutting capacity and efficiency.
- Spot size and worktable positioning accuracy: The spot size after the laser beam is focused determines the cutting accuracy – the smaller the spot, the greater the cutting accuracy. At the same time, the positioning accuracy of the work table determines the repeated cutting accuracy, which is crucial to improving production efficiency and ensuring product quality.
The impact of a laser cutting machine's core configuration on its performance is mainly reflected in aspects such as cutting speed, processing capacity, cutting precision and efficiency. By optimizing the main components and overall configuration, the working performance of the laser cutting machine can be significantly improved to meet different production demands.
Conducting an on-site inspection of the laser cutting machine manufacturer
When carrying out a field inspection of laser cutting machine manufacturers, the following key indicators should be focused on to ensure product quality:
Cut quality: This is an important indicator for evaluating the performance of a laser cutting machine. It includes various aspects such as cutting surface roughness, cutting accuracy, perpendicularity and cutting speed. High-quality laser cutting is characterized by the absence of cutting defects and a low roughness value on the cutting surface.
Cutting width: Cutting narrowness is mainly related to the laser beam spot diameter. Although the width of the cut made by a metal laser cutting machine generally does not affect the quality of the cut, it is very important to form a particularly accurate profile within a part.
Manufacturer's strength and after-sales service: Understanding the laser tube cutting machine manufacturer's strength and after-sales service is also a factor to consider when choosing a manufacturer.
Production process and equipment assembly and debugging: Personally visiting the factory to inspect and understand the production, assembly, installation and debugging process of fiber laser cutting equipment can provide you with a direct understanding of the production capacity and technical level of the manufacturer.
Price and Budget: Choose a manufacturer based on your budget. The price can be negotiated based on the performance of the equipment and the services provided by the manufacturer.
When carrying out a field inspection of laser cutting machine manufacturers, it is important to focus on key indicators such as cutting quality, cutting width, manufacturer strength and after-sales service, production process and equipment assembly and debugging , as well as price and budget, to ensure the purchase of high quality products.
Security and compliance standards
When selecting a laser cutting machine, customers must consider safety and compliance standards to ensure operator safety and legal compliance. Manufacturers are responsible for designing machines that align with various regional and international regulations.
Key security features:
- Emergency stop buttons : Crucial for immediate shutdown in case of emergency.
- Protective housing : Enclosures that prevent laser exposure and contain vapors.
- Interlocks : Safety mechanisms that stop operation if a gate or cover is open.
Compliance Certifications:
| Certification | Description |
|---|---|
| CE marking | Indicates compliance with health, safety and environmental protection standards for products sold in the European Economic Area. |
| FDA Regulations | In the US, laser equipment must comply with Center for Devices and Radiological Health (CDRH) standards. |
| ISO 9001 | It represents a quality management system that ensures the manufacturer meets regulatory and customer requirements. |
Manufacturers must also provide adequate training materials and manuals that cover safe operating procedures. They may include information about proper handling, maintenance, and use of safety features.
User protections involve adequate ventilation systems to mitigate harmful vapors and the availability of personal protective equipment (PPE) such as laser safety glasses.
Lastly, it is critical that users verify that machines have undergone rigorous testing for stability and reliability under operating conditions. Compliance with safety and regulatory standards not only protects users, but also improves the overall functionality and longevity of laser cutting equipment.
Maintenance and post-purchase services
When selecting among the top laser cutting machine manufacturers, potential buyers should consider the maintenance and post-purchase services that come with their investment.
Scheduled maintenance
Manufacturers often provide scheduled maintenance programs to ensure machines operate at peak performance. This may include:
- Routine checks: Regular inspections to avoid breakdowns.
- Parts Replacement: Timely replacement of worn components.
Technical support
Technical support is crucial and typically involves:
- Help Center: Assistance available by phone or online.
- On-site service: Technicians dispatched to resolve complex issues.
Training Services
Proper training is provided to ensure users are skilled in machine operation and safety protocols. Training formats may vary:
- In-person training: Carried out at the manufacturer's facilities or at the customer's facilities.
- Online Modules: Web-based learning for convenience.
Warranty and Guarantees
Warranties offer protection against certain types of failures and defects:
- Standard warranties: Typically range from 1 to 3 years.
- Extended warranties: Available for additional purchase.
Availability of spare parts
Immediate availability of spare parts helps minimize downtime, with manufacturers offering:
- Parts Catalog: An extensive list of readily available replacement parts.
- Fast Delivery: Fast shipping options for urgent needs.
Buyers should investigate each manufacturer's offerings to ensure comprehensive post-purchase support.
Conclusion
After reading this article, many readers may have the question of which laser manufacturer is the best .
Each manufacturer presents unique strengths, highlighting the importance of aligning purchasing decisions with individual needs and expectations. Therefore, diligent research is recommended, looking at user reviews and the availability of post-purchase support to make a well-informed choice.
However, it is important to note that determining the best manufacturer requires a set of criteria such as product quality, value for money, and customer service. The criteria for determining the best manufacturer may vary, and therefore the conclusion about who is the best will also change. Furthermore, the best manufacturers are constantly evolving.
Therefore, the answer to the question of how to choose the best manufacturer lies in your own research and comparison.
You can also read the laser cutting machine buyer's guide for decision-making assistance for your business. A comprehensive comparison is necessary to find the best laser cutting machine supplier for your needs. If you would like to receive a quote for a fiber laser cutting machine, please do not hesitate to contact us.
