Segurança da puncionadeira: 12 precauções críticas

Punch Press Safety: 12 Critical Precautions

12 Punch Press Safety Warnings

Every punch press operator must pay close attention to the following safety warnings as they concern your safety.

#1: Read the instruction manual carefully before starting the punch press.

#2: Preferably use the two-hand function instead of the pedal function.

#3: Maintain a distance of 680 mm from the operation button to the danger area (the vertical projection of the stamping die).

#4: Do not place your hands in the working area of ​​the slide block while the punch press is in operation.

#5: Workers must follow all safety rules when using the punch press.

#6: The factory must train new workers for at least 3 to 6 months.

#7: Thoroughly inspect the press before starting it.

#8: The press should run for 1-3 minutes without material to check for any malfunctions.

#9: A worker's working time should not exceed 8 hours to avoid accidents caused by exhaustion.

#10: Put up a warning sign when adjusting or repairing the machine.

#11: Routine inspections should be performed by a designated person.

#12: Stop the press immediately if any abnormal noise or vibration occurs.

Conteúdo relacionado

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.