Projeto e fabricação de máquina automática de polimento de calçados

Design and manufacture of automatic shoe polishing machine

Design and manufacture of automatic shoe polishing machine

Abstract:

In this work, it is proposed to design a shoe sole cleaning machine, incorporating into this machine the ease of shoe polishing. Like all staff, teachers, etc. are required to wear clean shoes before entering their laboratories as these laboratories have instruments, sensors, etc. high precision and the indoor air must be very clean.

So the shoe sole cleaner with shoe polishing machine is designed considering all the parameters in terms of the customer's need in terms of portability and also economically available to him, thus providing not only a clean environment but also providing the quotient of style the person with a polishing effect.

INTRODUCTION

There is a famous proverb “ Cleanliness is next to divinity” . The machine we designed and manufactured implies this, called “sole cleaner with polishing machine”, here the shoe sole can be cleaned and polished in very less time and effortlessly.

Most industries, hospitals and educational institutions that have the most preserved laboratories, such as computer laboratories, instrumentation laboratories, operational theater and various productions, assembly sites in chemical and pharmaceutical industries, etc., must be free from dust and dirt that would be carried by the shoes. of employees to the work area, causing an untidy and sometimes dangerous work environment.

Automatic Shoe Polishing Machine Automatic Shoe Polishing Machine
As the primary importance given to the choice of footwear nowadays, its maintenance is also being taken care of and in some regions or areas a tidy environment is preferred, hence the cleaning of the footwear, upper and lower part of it and also to have a good appearance. elegant to human being, shoe polishing is necessary, considering all these factors, a wide range of machines for shoe sole cleaning machine and shoe polishing machine has evolved from the previous centuries and also the design introduces a variety of concepts of product and helps in selecting a better model for shoe sole cleaning and shoe polishing machine.

•There are two types of brushes used in shoe polishing,

1. BRISTLES BRUSHES

2. BRUSHES WITH HORSE HAIR

The shoe polishing machine consists of two layers of plate, the bottom plate consists of the fluid distribution mechanism and the power supply unit. The top layer consists of boot polishing and cleaning mechanism. which consist of four brushes made of nylon material. Here we use four brushes and categorize them into,

(1.) Left brush

(2.) Right hand brush

(3.) Front side brush

(4.) Rear side brush

Machine operation:

Design and manufacture of automatic shoe polishing machine Design and manufacture of automatic shoe polishing machine

This model basically works on the scotch yoke mechanism. In the scotch yoke mechanism, the rotary movement is converted into sliding movement. This movement provides a controlled path that is best for our project. Here a 12V motor is used for power transmission. This motor is connected with scotch yoke mechanism. It converts rotary motion into sliding motion. There is a sliding plate used for sliding movement which is used in domestic applications at home. This sliding plate is fixed with scotch yoke mechanism with the help of L-shaped aluminum angles. On the back of this angle the shoe polish brush is fixed with the help of a screw. For the rear and front, another 12V DC motor is used to rotate the brushes.

• Now when power is supplied, first power goes to step down transformer and 230V power is converted to 12V AC power. From there, it passes through the circuit and the AC power is converted into DC power. This power is supplied to the ON-Off switches that control the movement of the motors and pump.

• Here two switch frames are provided, of which the first switch frame consists of two switches which are used to control the two sliding movements and two rotary movements of the brushes and the second switch frame consists of a switch which is used to control fluid flow. of the two switch board, switchNO-1 is used to control the sliding movement of the brush and switchNO-2 is used to control the rotary movement of the front and rear side brushes.

• After connecting the power supply, simply turn on the engine and water pump start switches. The brushes start working automatically. There is a sliding movement of the brush that creates friction and will help improve the shine of the shoe.

Machine component

(1.) 12 VDC motor with 300 rpm

(2.) 12V transformer

(3.) WATER PUMP

(4.) Circuit for converting AC power to DC power

(5.) Two ON-OFF switches to control the sliding and rotating movement of the brush

(6.) An ON-OFF switch to control fluid distribution

(7.) SCOTCH fork mechanism

Conteúdo relacionado

Back to the blog

Leave a comment

Comments need to be approved before publication.