Pinça de Suporte Pneumático Automático – Projeto Mecânico

Automatic Pneumatic Support Gripper – Mechanical Project

Automatic Pneumatic Support Gripper – Mechanical Project

Synopsis

A pneumatic gripper can be thought of as a large flexible mechanical structure that is moved by some type of control system.

The control system receives input from a human operator and translates that command into the movement of actuators, which move the mechanical structure. The high-performance and high-power pneumatic clamping claw along with large volume capacity are suitable for holding heavy objects.

One form of inefficiency in current systems is due to the connection between the flows from the two cylinder ports. This is because most valves use a single spool to control flow to both ports. Due to this connection, it is impossible to set the pressure levels on both sides of the cylinder independently.

Therefore, the outlet side will develop back pressure, which acts in opposition to the direction of travel, which increases the pressure required on the inlet side to maintain movement.

How the pneumatic gripper works: How the pneumatic gripper works:

Since the force generated by the actuator is proportional to the pressure difference between the two sides, the actual pressures in the cylinder do not affect the cylinder action. The pneumatic system is used in the most important processes in Industries and Ports. Any work carried out by Pneumatic system, Ex: Lifting, Pulling, Pushing, Pressing, etc., above process can be easily carried out by Pneumatic system. In this working method of machines is designed through Air Pressure. Therefore this process is used for all types of work.

All types of jobs can be completed successfully with this method of creating pressure by pumping air. Pneumatic pump and pneumatic cylinder are used in this process. The pneumatic cylinder ram is the increase and decrease operation completed in this process.

Generally, pneumatic cylinder operations are based on pneumatic pump operation. Air is pumped into the pneumatic cylinder using the pneumatic pump system. It is manual operation.

Automatic Pneumatic Support Gripper - Mechanical Design Automatic Pneumatic Support Gripper – Mechanical Project

Benefits:

  • More efficient
  • Energy can be easily transmitted.
  • Less transmission loss.
  • Very easy retention process.
    • Disadvantages:

    1. High loads cannot be supplied.

    2. Support only for small types of jobs

    Conteúdo relacionado

    Back to blog

    Leave a comment

    Please note, comments need to be approved before they are published.