MUDANÇA AUTOMÁTICA EM VEÍCULOS DE DUAS E QUATRO RODAS

AUTOMATIC SHIFT ON TWO AND FOUR-WHEEL VEHICLES

AUTOMATIC GEAR SHIFT ON TWO AND FOUR WHEEL VEHICLES

TO AIM:

Manufacture automatic gear changing systems for two- and four-wheel vehicles.

SYNOPSIS

The main objective of this concept is to apply the equipment using automation systems in motor vehicles. This is the new innovative model mainly used for vehicles to control the vehicle. Here we are focusing on designing automatic gear shifting mechanism in two wheeler using electronic devices. This is very useful for gear shifting mechanism in motor vehicles. By using this we can easily control the vehicle and improve the performance of the vehicle as well as prevent gear wear.

Here we have two CC gun arrangements that are arranged on each side of the vehicle's pedal rest to apply the gear. The CC gun is attached to the end of the flat pedal support. The plate support has a pivot in the center. The weapons are operated with the help of electrical energy and are controlled by the control unit. The control unit is nothing more than the microcontroller, it is a small chip, it is already programmed and inserted into the chip for our project to work. One of the guns is used to apply the gear and the other to reduce the gears. Gears are applied to the vehicle depending on the speed of the vehicle. Speed ​​sensors are placed close to the wheel, the sensor detects the signal and provides the output signal to the control unit. Depending on the signal, the clutch and gears will be switched automatically with the help of the control unit. When the vehicle speed increases automatically, the clutch and gear changes in the vehicles. The arrangement is clearly shown in the diagram below.

Functioning of the automatic gear changer in two-wheeled vehicles Functioning of the automatic gear changer in two-wheeled vehicles


BENEFITS:

• Automatic method
• The system is useful for drivers
• Avoids fear when driving the vehicle
• Quick response is achieved
• Simple in construction
• Easy to maintain and repair
• Unit cost is lower
• Continuous operation is possible without stopping

APPLICATION

• It is applicable on all types of two-wheelers

See too :

1. Automatic gear changer on two-wheeler with pneumatic cylinder

http://learnmech.com/2015/05/automatic-gear-changer-in-two-wheelers.html

2. Automatic gear changer by DC Electronic Gun

http://learnmech.com/2015/02/project-abstract-of-automatic-gear.html

3. (Purchase project) AUTOMATIC GEAR CHANGING ON TWO AND FOUR WHEEL VEHICLES

http://learnmech.com/2015/10/buy-project-automatic-gear-changer-in.html

4. (Purchase project) Mechanical project for automatic gear changer.

Conteúdo relacionado

Back to the blog

Leave a comment

Comments need to be approved before publication.