Máquina perfuradora pneumática automática para furos de vidro

Automatic Pneumatic Drilling Machine for Glass Holes

Mechanical Design of Automatic Pneumatic Drilling Machine for Glass Holes

SYNOPSIS

In small-scale industries and automobile maintenance workshops, there are frequent needs for drilling, boring and reaming machines. Huge and complicated parts cannot be machined on ordinary machines. Furthermore, a separate machine is required for each operation. This increases the initial cost required, requires large area requirements and a large number of machines.

In a single machine, the entire operation specified above can be carried out, that is, after drilling the glass, after the common drill can be attached and the operation can be performed. By the application of pneumatics, the pneumatic cylinder with piston which is operated by an air compressor will give the successive action to operate this machine. With this, we can achieve our industrial requirements. Pneumatic gun coupled to the pneumatic cylinder. This machine is very useful for glass hole making machines.

INTRODUCTION

The main objective of our project is to perform various machining operations using “ Automatic Feeding Mechanism ” in drill press with the help of pneumatic sources.

For the developing industry, the operation carried out and the parts or components produced must have the lowest possible production cost, only then can the industry operate profitably.

In small-scale industry and automobile maintenance workshops, there are frequent needs for drilling, boring and reaming. Furthermore, a separate machine is required for each operation. This increases the necessary initial cost, requires large area requirements and a large number of machines. In our project the above complicated ones are fixed.

Máquina perfuradora pneumática automática para furos de vidro Automatic Pneumatic Drilling Machine for Glass Holes

WORKING PRINCIPLE

Compressed air from the compressor is used as the power medium for this operation. A double-acting pneumatic cylinder is used. Air from the compressor enters the flow control valve.

The velocity of an air path enters the pneumatic cylinder unit. Inside the cylinder has piston arrangement. This arrangement is fixed to the top of the bracket.

The other form of air enters the solenoid valve. The solenoid valves function throughout the correct air time range. Unidirectional air enters cylinder 1 due to the pressure that the different workpiece is punched. The other way for air to enter the cylinder due to the pressure difference through the drill head is to go to the old position. The solenoid valve is activated with the use of the solenoid valve. diamond drill bit for used machine.

FORMS

  • It is used in glassworks.
  • It is used to drill rear view glass at home.
BENEFITS

  • Compact and portable, easy to transfer and move.
  • Accuracy of up to 0.01 mm is achieved.
  • Simple in construction
  • Lower energy consumption.
  • Machining time is shorter
  • The maintenance cost is lower.
  • Weightless mechanism.
DISADVANTAGES

  • Only small parts can be machined.
  • Drilling can only be done for glass above 6 mm.
  • Qualified labor required

Conteúdo relacionado

Back to the blog

Leave a comment

Comments need to be approved before publication.