At Compraço, we have a wide range of non-slip steel floor plates that meet the Technical Standards ABNT NBR 6841-1988. They are available in different thicknesses and lengths.
We supply the following Chess Boards:
Thickness: 1/8", 3/16", 1/4", 5/16"
Width: 1200mm
Accreditation of quality management systems (ISO 9001), adherence to ABNT NBR 6841-1988 Standards and comprehensive test certificates ensure that you will receive what you expect, a good quality product that can be traced back to its origin, providing peace of mind and confidence in your project.
About our Chess Boards
The non-slip sheet is a flat material with a slightly raised 'floor' pattern. The checkerboard or diamond-shaped tread pattern is universally recognized and used by most Brazilian industries. In addition to commercial applications, Sheet Steel is commonly found in trailer or utility floors. The diamond pattern is applied to one side of the sheet, leaving the opposite side flat or featureless.
Chess Plate Applications
Typical uses for Non-Slip Steel Sheet involve general manufacturing, industrial flooring and non-residential applications.
- Steps, stairs and stair races
- Passage areas and corridors
- Flooring in storage areas
- Ramps, elevator floors
- Entrance Corridors
- garage floors
- trucks and trailers
- Emergency vehicles - Ambulances and fire trucks
WE PROVIDE NON-SLIP CHESS PLATE COIL
The benefits of the Chess Board
Non-Slip Steel Sheet can be used in commercial food areas and cold rooms to avoid slipping hazards. Appropriate examples would be inside trucks, food service or milk delivery trucks. Ultimately, it prevents boxes from slipping, falling or being damaged.
Sheet steel is exceptionally durable, particularly considering its lightweight properties. It is also corrosion resistant. The patterned side does all the work, providing the protection or decoration you need.
It is a considerably versatile steel floor. It can be applied virtually anywhere that has the potential to cause slip hazards. It is most commonly placed in high-traffic workplaces or other commercial areas exposed to slippery conditions. Extensive maintenance is usually required when the board comes into contact with salt water or corrosive chemicals. Even under these conditions, only annual checks and general maintenance are required, which is relatively inexpensive.
We guarantee the highest quality of steel floor plate standards. Our steel is ISO 9001 certified and meets all Brazilian industry standards.
WEIGHT TABLE FOR NON-SLIP CHESS PLATES
| WEIGHT KG/M2 | INCHES | THICKNESS |
| 23.00 | 2.85 mm | |
| 25.62 | 1/8" | 3.00 mm |
| 39.16 | 3/16" | 4.75 mm |
| 52.30 | 1/4" | 6.30 mm |
| 65.30 | 5/16" | 8.00 mm |
