AUTOMATIC TRANSMISSION ON TWO WHEEL – PNEUMATIC MODEL
SYNOPSIS
The main objective of this concept is to apply the equipment using automation systems in motor vehicles. This is the new innovative model mainly used for vehicles to control the vehicle.
Here we are focusing on designing automatic gear shifting mechanism in two wheeler using electronic devices. This is very useful for gear shifting mechanism in motor vehicles. By using this we can easily control the vehicle and improve the performance of the vehicle as well as prevent gear wear.
Here we are focusing on designing automatic gear shifting mechanism in two wheeler using electronic devices. This is very useful for gear shifting mechanism in motor vehicles. By using this we can easily control the vehicle and improve the performance of the vehicle as well as prevent gear wear.
See also: Project – Automatic gearshift model
BLOCK DIAGRAM
WORKING PRINCIPLE
Here we have two arrangements of pneumatic cylinders that are arranged on each side of the vehicle's pedal support for gear application. The pneumatic cylinder is fixed to the end of the flat pedal support. The plate support has a pivot in the center. The cylinders are operated with the help of electrical energy and controlled by the control unit. One of the cylinders is used to apply the gear and the other
to reduce gears. Gears are applied to the vehicle depending on the speed of the vehicle. Speed sensors are placed close to the wheel, the sensor detects the signal and provides the output signal to the control unit. For this purpose, we use a tape motor with a U-groove sensor here, so that the speed can be varied via the tape motor. Depending on the signal, the clutch and gears will be switched automatically with the help of the control unit.
When the speed of the vehicle automatically increases the clutch and gear changes in the vehicles. The arrangement is clearly shown in the diagram below.
to reduce gears. Gears are applied to the vehicle depending on the speed of the vehicle. Speed sensors are placed close to the wheel, the sensor detects the signal and provides the output signal to the control unit. For this purpose, we use a tape motor with a U-groove sensor here, so that the speed can be varied via the tape motor. Depending on the signal, the clutch and gears will be switched automatically with the help of the control unit.
When the speed of the vehicle automatically increases the clutch and gear changes in the vehicles. The arrangement is clearly shown in the diagram below.
BENEFITS
Ø Automatic method
Ø The system is useful for drivers
Ø Prevents fear when driving the vehicle
Ø Quick response is achieved
Ø Simple in construction
Ø Easy maintenance and repair
Ø Unit cost is lower
Ø Continuous operation is possible without stopping
DISADVANTAGE
We need to change the gear lever, which can increase the weight of the vehicle and reduce driver comfort.
APPLICATION
It is applicable on all types of two-wheeled vehicles.
See also: Project – Automatic gearshift model
DESIGN
FOR AUTOMATIC TRANSMISSION ON TWO WHEEL – PNEUMATIC
MODEL
FOR AUTOMATIC TRANSMISSION ON TWO WHEEL – PNEUMATIC
MODEL
See more projects about automatic gear shifting:
1. Automatic gear changer on two-wheeler with pneumatic cylinder
http://learnmech.com/2015/05/automatic-gear-changer-in-two-wheelers.html
2. Automatic gear changer by DC Electronic Gun
http://learnmech.com/2015/02/project-abstract-of-automatic-gear.html
3. (Buy Project) AUTOMATIC SHIFT ON TWO AND FOUR WHEEL VEHICLES
http://learnmech.com/2015/10/buy-project-automatic-gear-changer-in.html
4. (Purchase project) Mechanical project for automatic gear changer.
http://learnmech.com/2015/10/buy-project-mechanical-project-on.html
See also: Index of New Mechanical Designs, Innovations, Ideas 
